HOWTO Use Stunnel with POPFile

Obtain and install Stunnel,

Create a config file for stunnel as per normal plus this:

client=yes
service=popmail

[popmail]
accept = 127.0.0.1:210
connect = your.mail.server:995

Start stunnel, make sure it does not die. If you have problems add 'debug=7' to the above config file and fix any problems it reports.

Test it using telnet:
```
telnet 127.0.0.1 210
```
You should get a welcome message from the pop server, if you get nothing or it dies, … trouble time. Go back and check your configuration over.

Start your mail client, configure it's incoming POP3 mail server as 127.0.0.1 port 110

Configure your SSL email accounts as:

Incoming Mail Server: 127.0.0.1
Username: 127.0.0.1:210:username 
More Settings>Advanced: Incoming Server: 110

Try retrieving mail. If it doesn't work, go back and re-check your configuration.